Skip to content

Free roof inspection, and your home covered before we climb: (317) 516-6499

Beech Grove · Indianapolis · Greenwood · Cumberland

(317) 516-6499
Roofer in a yellow safety harness kneels on dark underlayment, drilling a fastener into a gray standing-seam metal panel, with finished panels running down the roof slope

ServicesMetal Roofing

Metal Roofing in Beech Grove, IN

We install standing seam and screw-down metal roofs built to shed snow and stand up to hard storms. Panels are cut with care, shavings and scrap are cleared every day, and your yard, flower beds and driveway look the way you left them.

A long-lasting roof from a crew that cleans up after itself

Metal roofing is a long-term choice. A well-installed standing seam roof sheds snow quickly, holds up to wind, and doesn't curl, crack or lose granules the way asphalt shingles do as they age. It costs more up front, so it makes the most sense if you plan to stay in your home for many years or you're tired of replacing shingles.

Metal also leaves a particular kind of mess. Cutting and drilling panels throws off tiny steel shavings that rust on concrete, scratch car paint and hide in the grass. We trim with hand shears where we can, cut on a covered station away from your windows, and run magnetic sweepers over the lawn and driveway at the end of every workday, not just the last one.

If metal isn't the best fit for your house or budget, we'll say so. Our Shingle Roofing page covers the other option most homeowners compare it with.

What your metal roof installation includes

Full tear-off and decking review

Old shingles and underlayment come off completely so we can examine each sheet of decking. Any soft or delaminated boards get replaced before new material goes on, and you see photos of what turned up.

Underlayment suited to metal

Metal gets hot under summer sun, so we lay a synthetic underlayment rated for high heat. Ice and water shield goes along the eaves and through the valleys, the spots where ice dams and snowmelt do the most damage in winter.

Panel and finish choices

We explain standing seam panels with concealed fasteners alongside more affordable exposed-fastener panels, plus gauge and paint finish options. You choose what suits your home and your budget.

Fitted flashing and a vented ridge

Flashing at chimneys, skylights, vent pipes and wall lines is bent to match each spot. A vented ridge lets heat and moisture escape the attic.

Snow guards over walkways

Snow slides off metal quickly. Above doors, paths and decks we can install snow guards so it releases a little at a time instead of all at once.

Protection and cleanup every day

Shrubs and beds are tarped, the AC unit is covered, scrap goes to the trailer before we leave, and a magnet sweep runs over the lawn and driveway each evening.

Signs metal roofing may be the right move

  • Shingles that keep failing

    Your shingles are curling, shedding granules or have been patched more than once. If you'd rather not face another replacement in a couple of decades, metal is worth a look.

  • Ice dams every winter

    Icicles and ice ridges along the eaves mean snow is melting and refreezing. A slick metal surface with ice and water shield underneath helps snow slide off before it can back up.

  • An old roof after a storm

    If hail or wind hit a roof that was already near the end of its life, compare metal and shingles before you decide. Our Storm Damage Repair page explains how we work with you and your insurance company on claims.

  • A leaking screw-down roof

    Older exposed-fastener roofs leak when rubber washers dry out and screws back out. We can replace the fasteners, or tell you honestly when the panels themselves are done.

  • This is the house you're keeping

    Metal pays off over time. The longer you plan to stay, the more its lifespan works in your favor.

How a metal roofing job runs

  1. 1

    Free inspection and measurements

    We get on the roof, measure it, check the decking from the attic where we can, and talk through panel styles and colors. You get a written, line-item estimate.

  2. 2

    Ordering and scheduling

    Metal panels are often made to length for your roof, so there's a short wait between signing and install. We watch the forecast and confirm your start date ahead of time.

  3. 3

    Protecting your property

    Before the first panel goes up, we lay tarps, cover plants and the AC unit, and set up a cutting station away from cars and windows.

  4. 4

    Install with cleanup each day

    Most homes take several days. Each evening the roof is watertight, scrap is hauled to the trailer and the yard gets a magnetic sweep so nobody steps on a shaving.

  5. 5

    Final walkthrough

    We walk the roof and the ground with you, check flashing and trim, and do one last sweep before we call the job finished.

What shapes the price of a metal roof

A metal roof asks for a bigger investment than asphalt shingles, and the gap depends on the system you pick. We list each part of the job on its own line in a written estimate, so you can see exactly where your money goes. If spreading the cost out would help, financing is available.

Panel style
Standing seam panels with hidden fasteners use more material and take more labor than exposed-fastener panels. In return, there are far fewer screws to check and replace down the road.
Size and steepness
A larger roof needs more panels and trim. A steep pitch calls for extra safety gear and a slower, more careful pace on the roof.
Valleys, dormers and penetrations
Each chimney, skylight, vent and dormer gets trim bent on site to fit it. A plain gable roof comes in lower than one with lots of angles and openings.
What the deck looks like underneath
Soft or rotted boards must be swapped out before metal can go down. The true amount only shows up after tear-off, so we photograph any bad sections and talk with you before that work is added.
Layers coming off
If your house has two or more layers of old shingles, tear-off takes longer and there is more to haul away.

Common questions about metal roofs

Something not covered here? (317) 516-6499

Will rain be noisy on a metal roof?

On a house, usually not. Solid decking, underlayment and the insulation in your attic all soften the sound, so a storm sounds close to what you hear on shingles. The loud metal roofs most people picture are on barns and sheds with open framing and nothing underneath.

Can hail dent metal panels?

Big hail can leave dents, more so on thinner panels. In most cases the dents are cosmetic and do not create leaks the way cracked or bruised shingles do. Thicker gauge panels resist dents better, and we can go over that choice during your free inspection.

Is it possible to install metal over my existing shingles?

In some cases it can be done, but we usually advise a full tear-off. Covering the old roof hides any rot in the deck and can hold moisture against it. We check what is under your shingles first and lay out the pros and cons so you can decide.

Does metal roofing make lightning more likely to hit my house?

No. A metal roof does not draw lightning any more than shingles do. It also will not burn, which is part of why some homeowners pick it.

How can I be sure my yard will be cleaned up?

Before our crew leaves each day, scrap is loaded up and the lawn and driveway get swept, so you never live with a mess between work days. We have been in business for 14 years and hold an A+ BBB rating, and we know a tidy yard is a big part of how people judge a roofing job. On the final day we walk the property with you so you can check it with your own eyes.

Brick ranch house with a new dark shingle roof on an overcast day, ladder at the eave, tarp on the lawn and covered materials in the driveway

Find out if metal fits your home

We'll inspect your roof, show you photos of what we find and give you a straight answer on metal versus shingles. The inspection is free, and there's no pressure to decide that day.